MCU_SWM221/I2C/EEPROM_24C02/APP/main.c

#include "SWM221.h"

#define SLV_ADDR  0x50

#define MEM_ADDR  0x10

char txbuff[4] = {0x37, 0x55, 0xAA, 0x78};
char rxbuff[4] = {0};

void SerialInit(void);
void I2CMstInit(void);

int main(void)
{
	uint32_t i;
	uint8_t ack;
	
	SystemInit();
	
	SerialInit();
	
	I2CMstInit();
	
	while(1==1)
	{
		/*************** EEPROM Write ***************/		
		ack = I2C_Start(I2C0, (SLV_ADDR << 1) | 0, 1);
		if(ack == 0)
		{
			printf("Slave send NACK for address\r\n");
			goto nextloop;
		}
		
		ack = I2C_Write(I2C0, MEM_ADDR, 1);
		if(ack == 0)
		{
			printf("Slave send NACK for memory address\r\n");
			goto nextloop;
		}
		
		for(i = 0; i < 4; i++)
		{
			ack = I2C_Write(I2C0, txbuff[i], 1);
			if(ack == 0)
			{
				printf("Slave send NACK for data\r\n");
				goto nextloop;
			}
		}
		
		I2C_Stop(I2C0, 1);
		
		printf("Master Write %X %X %X %X @ %X\r\n", txbuff[0], txbuff[1], txbuff[2], txbuff[3], MEM_ADDR);
		
		
		for(i = 0; i < 1000000; i++) __NOP();	// <20><>ʱ<EFBFBD>ȴ<EFBFBD><C8B4>ڲ<EFBFBD>д<EFBFBD><D0B4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
		
		
		/*************** EEPROM Read ***************/
		ack = I2C_Start(I2C0, (SLV_ADDR << 1) | 0, 1);
		if(ack == 0)
		{
			printf("Slave send NACK for address\r\n");
			goto nextloop;
		}
		
		ack = I2C_Write(I2C0, MEM_ADDR, 1);
		if(ack == 0)
		{
			printf("Slave send NACK for memory address\r\n");
			goto nextloop;
		}
		
		ack = I2C_Start(I2C0, (SLV_ADDR << 1) | 1, 1);
		if(ack == 0)
		{
			printf("Slave send NACK for address\r\n");
			goto nextloop;
		}
		
		for(i = 0; i < 3; i++)
		{
			rxbuff[i] = I2C_Read(I2C0, 1, 1);
		}
		rxbuff[i] = I2C_Read(I2C0, 0, 1);
		
		printf("Master Read %X %X %X %X @ %X\r\n", rxbuff[0], rxbuff[1], rxbuff[2], rxbuff[3], MEM_ADDR);
		
		if((txbuff[0] == rxbuff[0]) && (txbuff[1] == rxbuff[1]) && (txbuff[2] == rxbuff[2]) && (txbuff[3] == rxbuff[3]))
			printf("Success\r\n");
		else
			printf("Fail\r\n");

nextloop:
		I2C_Stop(I2C0, 1);
		for(i = 0; i < SystemCoreClock/4; i++) ;
	}
}


void I2CMstInit(void)
{
	I2C_InitStructure I2C_initStruct;
	
	PORT_Init(PORTA, PIN6, PORTA_PIN6_I2C0_SCL, 1);		//GPIOA.6<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ΪI2C0 SCL<43><4C><EFBFBD><EFBFBD>
	PORTA->OPEND |= (1 << PIN6);						//<2F><>©<EFBFBD><C2A9><EFBFBD><EFBFBD>
	PORTA->PULLU |= (1 << PIN6);						//ʹ<><CAB9><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
	PORT_Init(PORTA, PIN7, PORTA_PIN7_I2C0_SDA, 1);		//GPIOA.7<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ΪI2C0 SDA<44><41><EFBFBD><EFBFBD>
	PORTA->OPEND |= (1 << PIN7);						//<2F><>©<EFBFBD><C2A9><EFBFBD><EFBFBD>
	PORTA->PULLU |= (1 << PIN7);						//ʹ<><CAB9><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
	
	I2C_initStruct.Master = 1;
	I2C_initStruct.MstClk = 100000;
	I2C_initStruct.Addr10b = 0;
	I2C_initStruct.TXEmptyIEn = 0;
	I2C_initStruct.RXNotEmptyIEn = 0;
	I2C_Init(I2C0, &I2C_initStruct);
	
	I2C_Open(I2C0);
}


void SerialInit(void)
{
	UART_InitStructure UART_initStruct;
	
	PORT_Init(PORTA, PIN0, PORTA_PIN0_UART0_RX, 1);	//GPIOA.0<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ΪUART0 RXD
	PORT_Init(PORTA, PIN1, PORTA_PIN1_UART0_TX, 0);	//GPIOA.1<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ΪUART0 TXD
 	
 	UART_initStruct.Baudrate = 57600;
	UART_initStruct.DataBits = UART_DATA_8BIT;
	UART_initStruct.Parity = UART_PARITY_NONE;
	UART_initStruct.StopBits = UART_STOP_1BIT;
	UART_initStruct.RXThreshold = 3;
	UART_initStruct.RXThresholdIEn = 0;
	UART_initStruct.TXThreshold = 3;
	UART_initStruct.TXThresholdIEn = 0;
	UART_initStruct.TimeoutTime = 10;
	UART_initStruct.TimeoutIEn = 0;
 	UART_Init(UART0, &UART_initStruct);
	UART_Open(UART0);
}

/****************************************************************************************************************************************** 
* <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: fputc()
* <EFBFBD><EFBFBD><EFBFBD><EFBFBD>˵<EFBFBD><EFBFBD>: printf()ʹ<EFBFBD>ô˺<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʵ<EFBFBD>ʵĴ<EFBFBD><EFBFBD>ڴ<EFBFBD>ӡ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
* <EFBFBD><EFBFBD>    <EFBFBD><EFBFBD>: int ch		Ҫ<EFBFBD><EFBFBD>ӡ<EFBFBD><EFBFBD><EFBFBD>ַ<EFBFBD>
*			FILE *f		<EFBFBD>ļ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
* <EFBFBD><EFBFBD>    <EFBFBD><EFBFBD>: <EFBFBD><EFBFBD>
* ע<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>: <EFBFBD><EFBFBD>
******************************************************************************************************************************************/
int fputc(int ch, FILE *f)
{
	UART_WriteByte(UART0, ch);
	
	while(UART_IsTXBusy(UART0));
 	
	return ch;
}